Oxygen ingress occurs when atmospheric air enters a vapour recovery unit (VRU) or its connected vapour-handling system. When oxygen mixes with flammable hydrocarbon gases under certain conditions, it can create a serious fire or explosion risk.
Preventing oxygen ingress requires coordinated safeguards, including pressure control, gas blanketing, leak prevention, oxygen monitoring, automated shutdown systems and ignition-source controls. Together, these measures help industrial facilities maintain safer operations while supporting emissions control and equipment reliability.
A vapour recovery unit captures hydrocarbon vapours and volatile organic compounds (VOCs) generated during industrial storage and loading operations. Instead of releasing these emissions, the system collects recoverable gases and returns valuable products to the facility.
VRUs are commonly used at storage tanks and truck, rail and marine loading terminals. During these operations, liquid movement and pressure changes can release hydrocarbon vapours.
In a typical system, vapours enter a collection header before reaching recovery equipment. Zeeco's activated carbon VRUs capture hydrocarbons through adsorption, then use vacuum regeneration and an absorbent liquid stream to recover them.
Safe operation depends on controlling pressure, oxygen concentration and vapour composition, particularly in low-pressure systems where atmospheric air may enter through leaks or pressure-control equipment.
Combustion requires fuel, sufficient oxygen and an ignition source. When atmospheric air enters a VRU containing combustible gases, it can create an ignitable mixture. If that mixture encounters sufficient ignition energy, a fire or explosion may occur.
The following two concepts help explain this risk:
These values depend on vapour composition, temperature, pressure and other operating conditions, but they are not universal safety thresholds.
Air can enter a VRU through:
When internal pressure falls below atmospheric pressure, air may be drawn through openings that would otherwise release vapour under positive pressure. Prevention begins with identifying these entry points and the operating conditions that allow oxygen ingress.
Maintaining appropriate tank and vapour-header pressure is a primary defence against atmospheric air entering a VRU.
As liquid levels fall or vapours are withdrawn, tank pressure can decrease. Without adequate pressure management, ambient air may enter through venting equipment or other openings.
Gas blanketing introduces a controlled gas into a tank's vapour space to maintain the required pressure and atmosphere. Nitrogen is commonly used when an inert blanket is required. In some applications, an appropriate fuel gas may be used, although combustible gases do not provide the same inerting protection as nitrogen.
As operating conditions change, the blanketing system supplies gas to maintain pressure and reduce uncontrolled air entry.
Effective pressure management may involve:
These components must work together. Gas blanketing cannot compensate for significant leaks, incorrectly sized equipment or unsuitable operating settings. Blanketing media, pressure settings and system configuration require site-specific engineering assessment.
Pressure management and gas blanketing help prevent oxygen ingress. Oxygen analyzers provide another layer of protection by detecting oxygen when air enters the system. Depending on the design, analyzers may monitor the VRU suction header or other engineered locations, and their readings must support a defined response to abnormal conditions.
An engineered monitoring system may include:
For example, rising oxygen levels alongside falling header pressure may indicate a leak or pressure-control problem. Tracking these changes over time can help operators identify recurring issues, while rugged HMIs can improve visibility into vapour recovery operations and support troubleshooting.
Oxygen monitoring should connect to alarms and protective actions based on the facility's hazard assessment. These may include equipment isolation, stopping vapour transfer or initiating a controlled shutdown.
No universal oxygen alarm or shutdown threshold applies to every VRU. Setpoints must reflect vapour composition, flammability characteristics, operating conditions and analyzer performance. Safety-critical shutdown functions also require appropriate design, testing and management.
Deteriorating mechanical equipment can create air-entry pathways even in well-monitored systems. Routine maintenance should include inspection of tank hatches, pressure-vacuum relief devices, piping, flanges, gaskets, valves, equipment seals, vacuum pumps and pressure-control instrumentation.
Components operating near or below atmospheric pressure deserve particular attention because leaks may allow air to enter the system.
A flashback occurs when a flame propagates through connected vapour-handling equipment toward upstream components.
Appropriately selected deflagration or detonation arresters can help limit flame propagation under specified conditions. Their suitability depends on gas composition, installation location, piping configuration and the anticipated combustion scenario.
Flashback protection does not prevent oxygen ingress. It helps limit escalation if ignition occurs. Additional precautions include controlling ignition sources, monitoring equipment temperature and using electrical and instrumentation equipment appropriate for the hazardous-area classification.
Oxygen-ingress risks can develop as equipment ages or operating conditions change. Recurring alarms may indicate deteriorating seals, valve wear, changing vapour flow or instrumentation problems.
Potential areas for assessment include:
These issues should be evaluated as part of the broader system rather than treated as isolated component failures. In some cases, upgrading existing vapour recovery equipment and controls may help improve reliability and operational efficiency. Any potential safety benefits, however, must be assessed against the specific hazards and protective functions involved.
Industrial facilities may use different technologies to manage combustible gases:
During certain upset or retrofit conditions, alternative vapour handling may be necessary. However, a combustor or flare is not automatically suitable for an oxygen-contaminated stream. The receiving equipment must be compatible with the gas composition, flow and associated safety requirements.
For Canadian industrial facilities, VRU safety intersects with process safety, emissions control, hazardous-area requirements and mechanical integrity. Applicable requirements depend on the jurisdiction, facility and operating conditions. No single analyzer, valve or protective device can eliminate oxygen-ingress risk.
This checklist supports engineering review but does not replace a formal hazard assessment or qualified technical evaluation.
Preventing oxygen ingress requires coordinated pressure control, gas blanketing, oxygen monitoring, automation, mechanical integrity and protective devices. Recurring oxygen alarms or unstable pressure may indicate broader system issues that require engineering assessment rather than isolated equipment repairs.